Furnace
Brazing
¡Ü Introduction
Brazing is the joining of metals through the use of heat and a filler
metal - one whose melting temperature is above 840°F(450°C)
but below the melting point of the metals being joined.
Brazing is probably the most versatile method of metal joining today,
for a number of reasons.
Brazed joints are strong. On non- ferrous metals and steels, the
tensile strength of a properly made joint will often exceed that
of the metals joined. On stainless steels, it is possible to develop
a joint whose tensile strength is 130,000 pounds per square inch.
( 896.3 megapascal [MPa] ).
Brazed joints are ductile, able to withstand considerable shock
and vibration.
Brazed joints are usually easy and rapidly made, with operator skill
readily acquired.
Brazing is ideally suited to the joining of dissimilar metals. You
can easily join assemblies that combine ferrous with nonferrous
metals, and metals with widely varying melting points.
Brazing is essentially a one-operation process. There is seldom
any need for grinding, filing or mechanical finishing after the
joint is completed.
Brazing is performed at relatively low temperatures, reducing the
possibility of warping, overheating or melting the metals being
joined.
Brazing is economical. The cost- per-joint compares quite favorably
with joints made by other metal joining methods.
Brazing is highly adaptable to automated methods. The flexibility
of the brazing process enables you to match your production techniques
very closely to your production requirements. With all its advantages,
brazing is still only one of the ways in which you can join metals.
-Shinhan newly equipped the biggest sized brazing furnace in Korea.
It can possible to braze the products which were not applicable
to brazing for it¡¯s large size or shape.
¡Ü Brazing advantages
1. Joint strength
2. Lower temperatures/lower cost
3. Maintains integrity of base metals
4. Dissimilar metals easily joined
5. Good joint appearance
6. Operator skill easily acquired
7. Process easily automated
¡Ü Comparison with
other Joining Methods(Ç¥ ÂüÁ¶)
¡Ü Furnace Specifications
Insertion gate size: Width 300mm x Height 200mm
Capacity: 180kg / hr
We can provide as
your request by E-mail.
Please use below address and phone number.
shnhnmt@hanmail.net
Address: 979-2 Keumsan-Ri, Chilgok-Gun, Waegwan-Eup, Kyungsangbuk-Do,
Korea
Tel : 82-54-975-9711 Fax : 82-54-975-9732
|
|
